HoistQuip

Lifting Beam, Lifting Beams, Spreader Beam, Spreader Beams.

2008-07-21T11:46:00.000-07:00

http://www.flickr.com/photos/hoistquip/2689285631/

See examples of HoistQuip's Lifting Beams here : http://www.flickr.com/photos/hoistquip/

Lifting\spreader beams are the practical and safe choice for long material to prevent sagging and shifting, or for loads where the weight has to be carefully distributed or suspended from several points.
The extensive standard programme offers a wide variety of payloads, working widths, adjustable ranges and hooks for common applications. The heavy-duty and cost-effective standard type is complimented by various special designs made to customer's specifications.
These may include spreader beams with hooks for plate material, or with C-hooks, crane forks, or grabs for bulky and long materials.
Special designs with laterally fixed hooks are fitted with slings to pick up rolls, pipes and similar objects. Also available are the so called 'star' spreader beams for picking up cylindrical materials and spreader beams with side hooks and 4-point support which share the easy operation, reliability and safety of all our Lifting\Spreader beams.
HoistQuip have extensive experience in the Design, Manufacture and Installation of :
Lifting Beams, Spreader Beams, Low Headroom Lifting, Cruciform Lifting Beams, Big Bag Lifting Beams, modulift, beams for lifting, Adjustable spreader beam, roof truss lifting beams, I section lifting beams. 2 Point lifting Beams, 3 Point Lifting Beams, Multi Point Lifting Beams.
Lifting Beam, Spreader Beam, Low Headroom Lifting, Cruciform Lifting Beam, Big Bag Lifting Beam, modulift, beams for lifting, Adjustable spreader beam, roof truss lifting beam, I section lifting beam. 2 Point lifting Beam, 3 Point Lifting Beam, Multi Point Lifting Beams.
See HoistQuip on YouTube : http://uk.youtube.com/HoistQuip
See HoistQuip Blog : http://hoistquip.blogspot.com/
See HoistQuip Photos : http://www.flickr.com/photos/hoistquip/

Product Data - Electric Belt Hoist - HoistQuip

2008-06-27T05:14:00.000-07:00

Electric Belt Hoist

The EUROLIFT BH electric belts hoist has been designed with this resolutely innovative attitude, as witnessed by the fact that its design alone has given rise to 3 patents.
The EUROLIFT BH is today the only belt and hook hoisting unit offering you the following features in its standard version:

Hoisting belt: high strength belt with high safety factors, easy and quick to replace, thanks to its design.
Two mechanically variable hoisting speeds.
Belt guide: enhanced safety features against side pulling and twisting effects during lifting movement.
Hoisting and control features complying with IEC 34.1/IEC 34.2, IP 55 protection and class insulation standard.
Totally enclosed , high precision, silent and sealed reduction gear.
Adjustable upper and lower limit switches.
Travelling limit switches.
Load limiter, safety feature protecting against excessive overloading of the pulley and runway path.
(mandatory, to comply with the "MACHINES" Directive).
Very low "C" dimensions and hook "approaches".
True vertical lift (vertical movement of hook block when hoisting)

Lifting Belts

High strength polyester belt.
Flame-retardant with good dimensional stability and excellent ability to main-tain its strength after immersion inboiling water.
Excellent ability to withstand attack by acids.immune to attack by solvents.Rot-proof.
BH5: Dynema belt (this belt has the same characteristics as those of the BH2, with a greater safety factor).

Options

The EUROLIFT BH can be equipped with a great many options and can be specifi cally adapted for special purpose uses:

Total anti-corrosion protection.(*)
Covering roof for protection against rain.
Horn controlled from push button box.
Explosion-proof hoist.
Non standard beam section width
Higher travelling speeds
Time counter
EUROMOTE type infrared or radio remote-control
Travelling movement limit switch
Trolley mounted on bogies
Special power supply voltage
Tropicalised travelling movement and lifting motors
Load limiter with 2 or 3 steps
Stainless steel hook and hook block (**)(*) except BH5.(**) up to 2.5 T only. 3.2 T and 5 T stainless steel hook block, painted hook.

Please contact us :

Tel - 01743 446666

Fax - 01743 442448

E Mail - webcontact@hoistquip.co.uk

See HoistQuip on YouTube : http://uk.youtube.com/HoistQuip
See HoistQuip Website : http://hoistquip.co.uk/
See HoistQuip Photos : http://www.flickr.com/photos/hoistquip/

Fall Arrest Harness, Safety Harness, High Temperature, Hostile Applications, Kevlar Safety Harness

2008-06-25T07:47:00.000-07:00

HIGH TEMPERATURE NOMEX®/KEVLAR®SINGLE POINT FALL ARREST HARNESS

Description :
This CE marked harness which conforms to EN361, is equipped with a rear fall arrest attachment point for fall protection purposes.The DBI-SALA High temperature harness uses special webbing constructed from flame resistant Nomex® outer with a Kevlar® core, webbing with a 425°C char temperature resistance level.This innovative webbing is as flexible and soft to the touch as any traditional webbing.
So if you are welding, you want the protection of the DBI-SALA High temperature Nomex®/Kevlar® harness.It has adjustments on the chest, shoulders and legs to provide a perfect fit to give maximum comfort and safety during work.
The harness also incorporates the exclusive Patented Delta No-TangleT design which holds the shape of the harness, adding to your comfort, and making it easier to don.Model: KB1K-P29 - Nomex®/Kevlar® harness.

Applications:
- Welding
- Grinding
- Foundry/casting
- Hot environments

Nomex®/Kevlar® webbing for flame,heat and cut resistance.
Delta No-TangleT design for added comfort and easy donning.
Simple and quick to fit and adjust.
Adjustable rear fall arrest attachment point.
Adjustment on chest, shoulders and legs.

OPTIONS:
KE5175K : high temperature energy absorbingfall arrest lanyard which conforms to EN standardEN355, constructed from Kevlar®, 1.75m length, 535g weight. Supplied with 8mm triangular screw link, and canbe used with a connector from the DBI-SALA Karabiner range.

Please contact HoistQuip Ltd

Tel. 01743 446666

Fax 01743 442448

E-mail - webcontact@hoistquip.co.uk

Web - http://www.hoistquip.co.uk/

Goods Lifts, Material Lifts, Lifts

2008-06-25T06:12:00.000-07:00

Goods Lifts, Material Lifts, Lifts

HoistQuip can offer bespoke Goods Lifts / Material Lifts to suit your application. All Designed and fabricated in-House.
Invertor controlled soft start / stop.
Optional length, width, height goods lifts.
Goods lifts with headroom constraints.
Single or Multi storey goods lifts.
High usage goods lifts.
Indoor or outdoor applications.

Please contact us for more information.

Tel - 01743 446666

E Mail - Webcontact@hoistquip.co.uk

Website : http://www.hoistquip.co.uk/categories.php?cat=Goods_Lifts,%20Material_Lifts,%20Lifts
See HoistQuip on YouTube : http://uk.youtube.com/HoistQuip
See HoistQuip Photos : http://www.flickr.com/photos/hoistquip/

Training Course - CDM Awareness

2008-06-25T01:12:00.000-07:00

Construction (Design & Management) Regulations 2007

This is a two-day course designed for the training of Persons appointed to the role of CDM Co-ordinator within an organisation. It is a highly participatory course that aims to teach the essentials that every CDM Co-ordinator needs to know to enable him/her to effectively undertake the role and responsibilities. All delegates are assessed via a one-hour examination at the end of the course.
On successful completion they will have the opportunity of making an initial application for membership of APS (The Association for Project Safety, and undertaking their open-book, multi-choice format, examination and thus achieving a nationally recognised qualification.
Syllabus:
Day 1:
· An Introduction to CDM
· The Individual Roles
· The Client
· The CDM Co-ordinator
· The Principal Contractor
· The Designer
· The Contractors
· The Pre-Tender Health and Safety Plan
· The Construction Health and Safety Plan
· The Health and Safety File
· The Notification F10

Day 2:

· The CDM Co-ordinator - Roles and Responsibilities
· The Development of a Pre-Tender Health and Safety Plan
· The Completing of Notification F10

1 Hour Assessment
The first day can be undertaken as an awareness course for delegates

Telephone – 01743 446666
Fax – 01743 442448
E Mail – webcontact@hoistquip.co.uk
Web – www.hoistquip.co.uk

Training Course - CCNSG Passport training scheme

2008-06-25T01:10:00.000-07:00

CCNSG
NATIONALLY ACREDITED SAFETY PASSPORT
TRAINING SCHEME

THE SCHEME

In the early 1990’s, a consortium of major industrialists from the power generation, steel, oil, gas and chemical industries recognised the need to train their contractors in basic safety.

Most were providing a site induction, some were training their contractors, but there were no common standards. Two groups, in the North East and in West Wales, working in co-operation, set out to standardise their basic safety training and devised a core curriculum which became the foundation of a training scheme which has grown to national proportions.

The scheme, which results in the award of a ‘Safety Passport’ to contractor site personnel, is monitored and controlled by a national steering group known as the Client/Contractor National Safety Group (CCNSG).

Representatives from major clients are nominated by local safety groups to serve on the CCNSG and there is also representation from contractors, training providers and trade unions.

The CCNSG meets regularly to ensure that standards are being maintained and that the content of the training scheme continues to meet current safety legislation and current safety practices.

THE TRAINING AND ASSESSMENT

The two – day training programme covers 4 sessions:

· Behaviour

· Safe Place of Work

· Safe Systems of Work

· Problems and Safe Solutions

Some of the Topics are listed below:

· Safety Behaviour, Rules Standards and the Law

· Working at Heights

· Safe Access and Egress

· Accident and First Aid Procedures

· Fire Precautions and Procedures

· Manual Handling

· Noise

· Working with Cranes and Heavy Equipment

· Equipment Isolation

Well-trained and informed Supervisors are a legal must. Therefore an additional day for supervisors, which emphasises the key role that supervisors have in securing health and safety includes safety communications and risk assessments.

The course itself involves a significant amount of trainee participation. Most contractors’ personnel know something about the topics before they arrive, and lively discussions are often the order of the day.

In presenting the course, the trainers talk with the trainees rather than at them, giving the continuous message “If you can’t do it safely, don’t do it”.

The award of the Safety Passport is subject to the candidate successfully completing 4 multiple-choice test papers.

Successful candidates receive a plasticised photographic pass that is valid for three years. Upon expiry, a one-day Renewal has to be taken.

To assist the administration of the scheme, all records are computerised on a database maintained by the Engineering Construction Industry Training Board (ECITB).

Telephone – 01743 446666
Fax – 01743 442448
E Mail – webcontact@hoistquip.co.uk
Web – www.hoistquip.co.uk

Training Course - COSHH

2008-06-25T01:08:00.000-07:00

CONTROL OF SUBSTANCES HAZARDOUS TO HEALTH

This half-day course is targeted at people who may be exposed to hazardous substances.

It will give them the awareness of the hazards and risks involved with the use of hazardous substances.

The course will contain the following elements:

· Control of Substances Hazardous to Health Regulations 2002

· Responsibilities under COSHH.

· What is a hazardous substance?

· Assessment of a hazardous substance.

· Exposure limits.

· Control measures.

· Monitoring and Health surveillance.

Telephone – 01743 446666
Fax – 01743 442448
E Mail – webcontact@hoistquip.co.uk
Web – www.hoistquip.co.uk

Training Course - Crane Appointed Person

2008-06-25T01:07:00.000-07:00

CRANE APPOINTED PERSON

This 2 - day course is designed to give delegates the knowledge and skills required to undertake the role of Appointed Person for lifting operations.

This course will cover the following elements:

· Legislation

· Terminology

· Code of Practice

· The overall planning of lifting operations

- Where the load is picked up from

- Where the load will be placed

- Weight of the load

- How the load is to be slung

- How the crane driver will be directed

- Proximity of the public

· Production of Method Statements

· Risk Assessment forms

· Maintaining and recording tests and inspections

- Lifting equipment

- Cranes

Authorisation of Slingers / Signallers

Telephone – 01743 446666
Fax – 01743 442448
E Mail – webcontact@hoistquip.co.uk
Web – http://www.hoistquip.co.uk/

Training Course - Crane Appreciation Course

2008-06-25T01:06:00.000-07:00

CRANE APPRECIATION COURSE
DURATION:

1 Day

CONTENTS:

Health and Safety Legislation

- Management of Health and Safety at Work Regulations 1999

- Lifting Operations and Lifting Equipment Regulations 1998

Terminology

- Crane Components

- Crane Operations

- Safe Working Load

- Automatic Safe Load Indicator

Codes of Practice

Stability

Automatic Safe Load Indicator

Banksman

Control of Lifting Operation

- Safe System of Work

- Appointed Person

There is no formal assessment at the end of this course

Telephone – 01743 446666
Fax – 01743 442448
E Mail – webcontact@hoistquip.co.uk
Web – http://www.hoistquip.co.uk/

Training Course - Display Screen Equipment for Users

2008-06-24T05:52:00.001-07:00

DISPLAY SCREEN EQUIPMENT FOR USERS

This half-day course is targeted at people who are designated as users of display screen equipment.

It will give them the awareness of the hazards and risks involved with the use of display screen equipment and the associated peripherals.

The course will contain the following elements:

· Display Screen Equipment Regulations 1992.

· Responsibilities under the Display Screen Equipment Regulations 1992.

· What is a workstation?

· Hazards of display screen equipment.

· Causes of injuries and remedies.

Telephone – 01743 446666
Fax – 01743 442448
E Mail – webcontact@hoistquip.co.uk
Web – www.hoistquip.co.uk

Training Course - Display Screen Equipment for Users

2008-06-24T05:52:00.000-07:00

Training Course - Basic Electrical H&S

2008-06-24T05:32:00.000-07:00

BASIC ELECTRICAL COURSE

The course is specifically designed to assist non-electrical employees to prepare them for carrying out minor electrical tasks.
It also helps companies comply with the requirements of current electrical legislation regarding the use of such people for minor electrical tasks.

COURSE DURATION: 2 days

COURSE OBJECTIVES:

After completing the course, delegates should be able to:

· Recognise safe working practices with regard to electricity in the workplace.
· Work within the requirements of current electrical legislation.
· Understand the fundamental principles of electrical strategy.
· Perform specific electrical tasks at basic level.
· Perform safe isolation of electrical circuits.
· Enhance the workplace skills.

WHO SHOULD ATTEND:

The course is primarily aimed at mechanical/instrument trade persons that are preparing themselves for work upon electrical systems.

PREREQUISITES:

Basic numerical and literacy skills are required.

TOPICS COVERED:

· Health and Safety Legislation relating to electricity in the workplace.
· Basic electrical principles.
· Safe isolation of electrical units
- Testing for dead.

· Safe working practices.
· Electrical test equipment.
· Connecting and disconnecting 3ph and 1ph electric motors.
· Electrical control circuits.

COURSE VALIDATION:

Participants who successfully complete the training will be awarded a Certificate.

Telephone – 01743 446666
Fax – 01743 442448
E Mail – webcontact@hoistquip.co.uk
Web – http://www.hoistquip.co.uk/

Training Course - Fire Risk Assessment

2008-06-24T05:31:00.002-07:00

FIRE RISK ASSESSMENT

INTRODUCTION

This is a 1 day course designed to provide employers and employees with the knowledge and skills required to identify fire hazards and put control measures in place to minimise the chance of a fire starting.

The course will cover the following elements:

· Legislation
· The Regulatory Reform (Fire Safety) Order 2005

· Objectives of risk assessment
· Definition of hazard and risk
· Differences between different types of fire incident
· Identifying fire hazards

· Evaluating risk and adequacy of current controls

· Action plans to control risk

· Environmental impact of fire

ASSESSMENT

A question paper will be given at the end of the course to ascertain whether a level of competence has been achieved.

A Certificate will be awarded to those delegates who reach a satisfactory standard

Telephone – 01743 446666
Fax – 01743 442448
E Mail – webcontact@hoistquip.co.uk
Web – http://www.hoistquip.co.uk/

Training Course - Fire Warden Refresher

2008-06-24T05:31:00.001-07:00

FIRE WARDEN REFRESHER

COURSE DESCRIPTION:

A 4-hour session covering refreshment of the knowledge and skills acquired related to the hazards present at your premises.

ATTENDEES:

The staff employed in your premises with a special responsibility for fire safety, acting as Fire Wardens, who have attended the initial course.

AIM:

To refresh the training of existing Fire Wardens in the basics of evacuation procedures and fire prevention and suppression, in order that they might reduce the possibility of fire and extinguish a small fire if one occurs.

LEARNING OBJECTIVES:

· Identify the main causes of fire in the workplace.
· State the action to be taken to prevent fires.
· Recognise the correct extinguisher to use on different types of fire.
· Use an extinguisher correctly.
· Make an emergency call to the Fire & Rescue Service.
· Carry out a fire evacuation procedure in accordance with Company Policy.
· Advise other staff members of the danger of fire.
· Demonstrate an awareness of the up-to-date developments in the fire safety field.

SUBJECTS COVERED:

· Causes of fire
· The physics of fire
· Fire prevention
· Getting the message across
· Methods of extinguishing small fires
· Identification of extinguishers
· Practical use of extinguishers
· Calling the Fire & Rescue Service and evacuating the premises
· Fire Drill procedures

ASSESSMENT:

A test will be set to confirm that the level of competence has been retained.
The Certificate awarded initially to those delegates who reached a satisfactory standard will be endorsed.

Telephone – 01743 446666
Fax – 01743 442448
E Mail – webcontact@hoistquip.co.uk
Web – http://www.hoistquip.co.uk/

Training Course - Fire Warden

2008-06-24T05:30:00.000-07:00

FIRE WARDEN

A one – day session covering the role of the Fire Warden with specific regard to the hazards present at your site.

ATTENDEES:

The staff employed in your premises with a special responsibility for fire safety acting as Fire Wardens, both Senior and Deputy Wardens.

AIM:

To train fire Wardens in the basics of fire prevention and extinguishing, in order that they might reduce the possibility of fire and extinguish a small fire if one occurs. To give the skills required in order to be able to monitor the general fire safety of their working area on a day-to-day basis with specific regard to the requirements of the fire certificate.

LEARNING OBJECTIVES:

· Identify the main causes of fire in the workplace.
· State the action to be taken to prevent fires.
· Monitor the fire safety in their workplaces.
· Recognise the correct extinguisher to use on different types of fire.
· Use an extinguisher correctly.
· Make an emergency call to the Fire & Rescue Service.
· Carry out a fire evacuation procedure in accordance with Company Policy.
· Advise other staff members on the danger of fire and the action required on discovery of a fire.

SUBJECTS COVERED:

· Cause of fire
· The physics of fire
· Fire prevention
· Getting the message across
· Methods of extinguishing small fires
· Identification of extinguishers
· Use of extinguishers
· Calling the Fire & Rescue Service and evacuating the premises
· Fire Drill procedures

ASSESSMENT:

A test will be set to ensure a level of competence has been achieved. A Certificate will be awarded to those delegates who reach a satisfactory standard.

Telephone – 01743 446666
Fax – 01743 442448
E Mail – webcontact@hoistquip.co.uk
Web – http://www.hoistquip.co.uk/

Training Course - Principles of Fire

2008-06-24T05:29:00.000-07:00

PRINCIPLES OF FIRE

INTRODUCTION

This is a 1 day course designed to provide employers and employees with the knowledge and skills required to identify fire hazards and how they can cause fires.

The course will cover the following elements:

· The combustion process
· Fire triangle
· Stages of combustion

· Ignition
· Identifying ignition sources
· Ignition of gases and liquids

· Classification of fire

· Fire growth
· Factors that influence fire growth
· Fire spread
· Fire in a physical enclosure

· Explosion
· Conditions for gas and dust explosions to occur
· Explosion suppression

ASSESSMENT

A test will be set to ensure a level of competence has been achieved.

A Certificate will be awarded to those delegates who reach a satisfactory standard

Telephone – 01743 446666
Fax – 01743 442448
E Mail – webcontact@hoistquip.co.uk
Web – http://www.hoistquip.co.uk/

Training Course - Asbestos Awareness

2008-06-24T05:25:00.000-07:00

ASBESTOS AWARENESS

INTRODUCTION

Although the Regulations prohibit the importation, supply and use of all forms of asbestos, it will be found in many older buildings.

This half-day course is designed for those in the construction industry who may be expected to come into contact with asbestos during the course of their work.

The course will cover the following elements:

· Legislation
· Control of Asbestos Regulations 2006
· What type of work will require a licence
· Informing the enforcing authority about work which must be licensed

· The types of asbestos
· What diseases can be caused by prolonged exposure
· Exposure limits

· Where asbestos is likely to be present

· Respiratory Protective Equipment
· When to wear it
· Maintaining it

ASSESSMENT

Delegates will be required to complete a question paper at the end of the course.

A Certificate will be awarded to those delegates who reach a satisfactory standard.

Telephone – 01743 446666
Fax – 01743 442448
E Mail – webcontact@hoistquip.co.uk
Web – http://www.hoistquip.co.uk/

Training Course - COSHH

2008-06-24T05:24:00.000-07:00

Training Course - IOSH Managing Safely

2008-06-24T05:23:00.000-07:00

IOSH MANAGING SAFELY

This is a four or five – day course designed by the Institute of Occupational Safety and Health for the training of line managers and persons appointed to the role of Health and Safety co-ordinator within an organisation.

It is a highly participatory course that aims to teach the essentials that every professional manager needs to know to enable him/her to effectively manage their Health and Safety responsibilities within an organisation.

All candidates are assessed via a one-hour examination at the end of the course and on successful completion will have achieved a nationally recognised qualification with certification.

The course will cover the following subject areas:

· Current Health and Safety Legislation.

· Active and re-active monitoring.

· Risk assessment.

· Common hazards associated with –
Fire
Electricity
Movement of people
Vehicles
Housekeeping
Noise
Display screen equipment
Manual handling
Chemicals

· Other hazards specific to your organisation.

· A practical project associated with the candidate’s area of responsibility.

Telephone – 01743 446666
Fax – 01743 442448
E Mail – webcontact@hoistquip.co.uk
Web – http://www.hoistquip.co.uk/

Training Course - IOSH Working Safely

2008-06-24T05:21:00.000-07:00

IOSH WORKING SAFELY

INTRODUCTION

Working safely trains workers to ensure that their individual and collective actions contribute to health and safety in the workplace and that responsibilities are clearly understood.

WHO SHOULD ATTEND

Working safely is aimed at all people whose work exposes them to risk.

AIM

To make workers, at all levels aware of their responsibility for safety towards themselves, colleagues and others affected by work activities.

OBJECTIVES

On successful completion of the course, delegates should be able to:

· Identify the hazards and evaluate the risks in the workplace
· Use appropriate workplace precautions for specific risks or seek advice on workplace precautions
· Assist managers in preparing written risk assessments
· Follow their organisation’s health and safety policy
· Co-operate and communicate on safety matters
· Carry out work activities without risk to themselves or others
· Report relevant accidents and incidents
· Monitor their own activities and assist managers in active monitoring.

COURSE STRUCTURE

Working safely requires a minimum of six hours direct input, including tutor delivery, discussion groups, syndicate exercises and use of self-teaching materials. An additional 35 minutes is required for assessments.

MODULE 1 Working safely

MODULE 2 Hazards – general

MODULE 3 Improving the Organisation’s safety performance

MODULE 4 Hazards –Organisation-specific

Telephone – 01743 446666
Fax – 01743 442448
E Mail – webcontact@hoistquip.co.uk
Web – http://www.hoistquip.co.uk/

Training Course - Pro-Active H&S through Teamwork

2008-06-24T05:20:00.000-07:00

PRO-ACTIVE HEALTH AND SAFETY THROUGH TEAM WORK
INTRODUCTION

This one day seminar is aimed at all levels of an organisation to demonstrate the advantages of the effective use of the teamwork ethos, by reducing operating costs, Notifiable Accidents, Employers Liability Insurance and improving employee involvement.

The course will cover the following subject areas

· The Management Role in culture changes.

· Development of Safe Attitudes.

· An Improved Management Style.

· Kick-starting the Process of Change

Telephone – 01743 446666
Fax – 01743 442448
E Mail – webcontact@hoistquip.co.ukWeb – http://www.hoistquip.co.uk/

Training Course - Pro-Active Management of Health and Safety

2008-06-24T05:19:00.002-07:00

PRO-ACTIVE MANAGEMENT OF HEALTH AND SAFETY

This two day course has been specifically designed to give line managers and supervisors the knowledge, skills and understanding of their responsibilities, under the Health and Safety at work Act 1974 and Management of Health and Safety at Work Regulations 1999, to enable them to carry out those responsibilities and duties safely and efficiently.

The course will contain the following elements;

· Roles and responsibilities

· Managing for Health and Safety

· Accident investigation

· Communication and presentations.

· Risk assessment

· Safety monitoring

· Behavioural safety

The course will have syndicate exercises that will involve role-play and discussion.

Candidates will be required to complete a question paper at the end of the final day.

Telephone – 01743 446666
Fax – 01743 442448
E Mail – webcontact@hoistquip.co.uk
Web – http://www.hoistquip.co.uk/

Training Course - Safety for Senior Executives

2008-06-24T05:19:00.001-07:00

SAFETY FOR SENIOR EXECUTIVES

This 1-day course is designed to provide Senior Executives with the knowledge and skills necessary to ensure that Health and Safety is managed effectively within the workplace.

The course will cover the following elements:

· Health & Safety Responsibilities under Civil and Criminal Law

· The Financial Implications of Occupational Accidents and Ill Health

· The Development of a Safety culture

· The Principles of Risk Management

· The Management of Health and Safety

Telephone – 01743 446666
Fax – 01743 442448
E Mail – webcontact@hoistquip.co.uk
Web – http://www.hoistquip.co.uk/

Training Course - Safety Representatives

2008-06-24T05:18:00.000-07:00

SAFETY REPRESENTATIVES

INTRODUCTION

This 2 day course is designed for those employees who wish to take on the role of Safety Representative for the workforce.

The course will cover the following elements:

· Legislation
· Safety Representatives and Safety Committees Regulations 1977
· Health & Safety (Consultation with Employees) Regulations 1996

· Role of the Safety Representative
· Who can take on the role
· Who elects or appoints them
· What can they do
· Who do they consult with

· Functions of the Safety Representative
· Tasks they can carry out
· Consulting with the employer on behalf of the workforce

· Safety Committees
· When should they be set up

ASSESSMENT

Delegates will be required to complete a question paper at the end of the course.

A Certificate will be awarded to those delegates who reach a satisfactory standard.

Telephone – 01743 446666
Fax – 01743 442448
E Mail – webcontact@hoistquip.co.uk
Web – http://www.hoistquip.co.uk/

Training Course - Manual Handling and Human Kinetics

2008-06-24T05:17:00.000-07:00

MANUAL HANDLING & HUMAN KINETICS

This 1 day course is designed to give delegates the knowledge and skills necessary to enable them to develop systems and procedures to eliminate and control manual handling risks.

The course will cover the following elements:

· The Problems with Manual Handling

· Manual Handling Assessment

· Control Measures

· Kinetic Lifting Techniques

Telephone – 01743 446666
Fax – 01743 442448
E Mail – webcontact@hoistquip.co.uk
Web – http://www.hoistquip.co.uk/

Training Course - Manual Handling Assessors

2008-06-24T05:13:00.000-07:00

MANUAL HANDLING ASSESSORS

This one – day course will give the employees who have been selected to be assessors appropriate knowledge and training necessary to undertake all manual handling task assessments within the working environment.

The course will be conducted in two distinct phases.

Phase one in the morning being dedicated to the theory elements.

Phase two in the afternoon being a practical manual handling risk assessment and group discussion.

The course will contain the following elements:

· Responsibilities under the Manual Handling Regulations 1992.

· Identification of manual handling hazards.

· Typical manual handling injuries.

· Introduction of mechanical systems.

· Introduction of mechanical aids.

· The use of personal protective equipment.

Telephone – 01743 446666
Fax – 01743 442448
E Mail – webcontact@hoistquip.co.uk
Web – http://www.hoistquip.co.uk/

Training Course - Manual Handling Awareness

2008-06-24T05:12:00.000-07:00

MANUAL HANDLING AWARENESS

This half – day course will give the employees appropriate knowledge and awareness necessary to undertake all manual-handling tasks safely.

The course will contain the following elements:

· Responsibilities under the Manual Handling Regulations 1992.

· Identification of manual handling hazards.

· Typical manual handling injuries.

· Introduction of mechanical systems.

· Introduction of mechanical aids.

· The use of personal protective equipment.

Telephone – 01743 446666
Fax – 01743 442448
E Mail – webcontact@hoistquip.co.uk
Web – http://www.hoistquip.co.uk/

Training Course - NEBOSH National Certificate in Construction Health & Safety

2008-06-24T05:10:00.000-07:00

NEBOSH NATIONAL CERTIFICATE IN CONSTRUCTION HEALTH & SAFETY

The NEBOSH National Certificate in Construction Safety & Health has been recognised for many years as the basis for a sound, broad introduction to the fundamentals of occupational health and safety for those working in the construction industry. The syllabus and means of assessment are to take account of current developments both in health and safety and in vocational assessment.

Accidents and work-related ill health affect all types of workplaces and occupations but are particularly significant in construction work. In the years 2001/02 there were 249 people killed at work and of those almost one-third (79) worked in the construction industry. Such deaths represent the tip of an unacceptable iceberg of harm done to people at work. In the same year, it is estimated that over one million people were injured at work, with injuries to construction workers featuring highly amongst these. In addition at least two million people were suffering some form of ill health caused by their work and, again, the prevalence of occupational ill health within the construction industry is above average. Construction workers are more likely to suffer musculoskeletal disorders than most other workers, and over five times more likely to contract an asbestos related disease.

Work related accidents and ill health are costly, not only in terms of individual human suffering but also financially – both to employers and to society as a whole. An estimated 25 million working days are lost each year as a result of workplace accidents and ill health, with a cost to the British economy of around 33-5 billion. The cost to British employers is estimated to be about “2.5 billion a year. When non-injury accidental events are included, the costs are likely to be twice these figures.

Construction employers who fail to manage health and safety adequately not only run the risk of having to meet those additional costs but may also face enforcement action, including prosecution in the criminal courts, by the regulatory authorities. This is apart from the personal suffering that they may inflict on those whom they employ and others that may be affected by their activities. While prosecution is a relatively rare occurrence, civil actions for the negligence of an employer are becoming increasingly more common and costly.

With this background, the NEBOSH National Certificate in Construction Safety and Health aims to provide those making day-to-day decisions in construction work with a broad knowledge of health and safety in order to ensure that the health and safety implications of their decisions are properly taken into account. The vast majority of occupational injuries and incidents of ill health are avoidable by good health and safety management, and good health and safety management should be recognised as an essential element of good overall management.

SYLLABUS:

· Foundations in construction health and safety

· Policy

· Organising for Health and Safety in construction

· Promoting a positive health and safety culture

· Risk assessment

· Principles of control

· General site issues– hazards and control

· Work at height– hazards and control

· Excavation work and confined spaces– hazards and control

· Demolition – hazards and control

· Movement of people and vehicles – hazards and control

· Work equipment – hazards and control

· Manual and mechanical handling – hazards and control

· Electrical hazards and control

· Fire hazards and control

· Chemical and biological health hazards and control

· Physical and psychological health – hazards and control

· Incident investigation, recording and reporting

· Monitoring, review and audit

Telephone – 01743 446666
Fax – 01743 442448
E Mail – webcontact@hoistquip.co.uk
Web – http://www.hoistquip.co.uk/

Training Course - Nebosh Certificate in Fire Safety and Risk Management

2008-06-24T04:53:00.000-07:00

NEBOSH CERTIFICATE IN FIRE SAFETY & RISK MANAGEMENT

With the adoption of risk based fire safety solutions under the Fire Precautions (Workplace) Regulations in 1997, the onus for providing a work environment safe from fire moved away from the Fire & Rescue Service Inspector to the owner/occupier/manager of premises used as places of work.

This has been further developed by the introduction of the Regulatory Reform (Fire Safety) Order (RRFSO) 2005, which has repealed the Fire Precautions Act 1971 and the Fire Precautions (Workplace) Regulations 1997, and also abolished the Fire Certificate.

Fire risks change all the time in any occupied building, and the solutions and systems put in place as a result of the initial risk assessment must be constantly reviewed and monitored to ensure they remain appropriate and effective. Risk based solutions for fire safety also depends, for their effectiveness, on every employee understanding the rationale behind certain measures and appreciating the consequences of any lapse or failure. This means that there is an ongoing need for training and commitment on the part of everyone in a company.

Candidates who already hold a NEBOSH National General Certificate or Construction Certificate (achieved within the last 5 years) can undertake the course, run over 4 days, which consists of the following elements:

· Managing Fire Safety
· Principles of Fire and Explosion
· Causes and Prevention of Fires
· Fire Protection in Buildings
· Safety of People in the Event of a Fire
· Fire Risk Assessment

However, for those candidates who do not hold a NEBOSH Certificate, the course will include part of the NEBOSH General Certificate syllabus. This course will run over 10 days and consists of the following elements:

· Health & Safety Foundations
· Policy
· Organising for Health & Safety
· Promoting a Positive Health & Safety Culture
· Risk Assessment
· Principles of Control
· Incident Investigation, Recording and Reporting
· Monitoring, Review and Audit
· Managing Fire Safety
· Principles of Fire and Explosion
· Causes and Prevention of Fires
· Fire Protection in Buildings
· Safety of People in the Event of a Fire
· Fire Risk Assessment

Telephone – 01743 446666
Fax – 01743 442448
E Mail – webcontact@hoistquip.co.uk
Web – http://www.hoistquip.co.uk/

Training Course - NEBOSH National General Certificate

2008-06-24T04:52:00.000-07:00

NEBOSH NATIONAL GENERAL CERTIFICATE

The NEBOSH National General Certificate has been recognised for many years as the basis for a sound, broad introduction to the fundamentals of occupational health and safety. The syllabus and means of assessment are to take account of current developments both in health and safety and in vocational assessment.

Accidents and work-related ill health affect all types of workplaces and occupations. In the years 2001/02 there were 249 people killed at work and a further 109 members of the public killed by work activities (excluding trespassers and suicides on transport systems). Such deaths represent the tip of an unacceptable iceberg of harm done to people at work. In the same year, it is estimated that over one million people were injured at work and at least two million people were suffering some form of ill health caused by their work.

Work related accidents and ill health are costly, not only in terms of individual human suffering but also financially – both to employers and to society as a whole. An estimated 25 million working days are lost each year as a result of workplace accidents and ill health, with a cost to the British economy of around 33-5 billion. The cost to British employers is estimated to be about “2.5 billion a year. When non-injury accidental events are included, the costs are likely to be twice these figures.

Employers who fail to manage health and safety adequately not only run the risk of having to meet those additional costs but may also face enforcement action, including prosecution in the criminal courts, by the regulatory authorities. This is apart from the personal suffering that they may inflict on those whom they employ and others that may be affected by their activities. While prosecution is a relatively rare occurrence, civil actions for the negligence of an employer are becoming increasingly more common and costly.

With this background, the NEBOSH National General Certificate aims to provide those making day-to-day decisions at work with a broad knowledge of health and safety in order to ensure that the health and safety implications of their decisions are properly taken into account. The vast majority of occupational injuries and incidents of ill health are avoidable by good health and safety management, and good health and safety management should be recognised as an essential element of good overall management.

SYLLABUS:

· Health and Safety foundations

· Policy

· Organising for Health and Safety

· Promoting a positive health and safety culture

· Risk assessment

· Principles of control

· Movement of people and vehicles – hazards and control

· Manual and mechanical handling – hazards and control

· Work equipment – hazards and control

· Electrical hazards and control

· Fire hazards and control

· Chemical and biological health hazards and control

· Physical and psychological health – hazards and control

· Construction activities – hazards and control

· Incident investigation, recording and reporting

· Monitoring, review and audit

Telephone – 01743 446666
Fax – 01743 442448
E Mail – webcontact@hoistquip.co.uk
Web – http://www.hoistquip.co.uk/

Training Course - Accident and Incident Investigation

2008-06-24T04:51:00.000-07:00

ACCIDENT & INCIDENT INVESTIGATION

This 1 – day course is designed to give delegates the knowledge and skills required to undertake effective accident and incident investigations.

The course will cover the following elements:

· The Cause of Accidents and their Prevention

· Immediate and Root Causes

· Investigating Accidents – Role Play

· Overview of RIDDOR

· Writing a Report

Telephone – 01743 446666
Fax – 01743 442448
E Mail – webcontact@hoistquip.co.uk
Web – http://www.hoistquip.co.uk/

Training Course - RIDDOR Awareness

2008-06-24T04:50:00.000-07:00

REPORTING OF INJURIES, DISEASES AND DANGEROUS OCCURRENCES REGULATIONS 1995 (RIDDOR)

INTRODUCTION

This ½ day course is designed to give employers the knowledge required to determine whether an injury, disease or incident is reportable to the enforcing authority.

This course will cover the following elements:

· RIDDOR 1995
· When to report
· What to report
· How to report

· Relevant enforcing authority

· Form F2508

· Records
· Making records available
· Keeping records

ASSESSMENT

Delegates will be required to complete a question paper at the end of the course.

A Certificate will be awarded to those delegates who reach a satisfactory standard.

Telephone – 01743 446666
Fax – 01743 442448
E Mail – webcontact@hoistquip.co.uk
Web – http://www.hoistquip.co.uk/

Training Course - Crane Appointed Person

2008-06-24T04:49:00.000-07:00

Training Course - Crane Appreciation

2008-06-24T04:47:00.000-07:00

Training Course - Slinger / Signaller

2008-06-24T04:46:00.000-07:00

SLINGER / SIGNALLER

This 1 - day course is designed to give delegates the necessary knowledge and skills required to undertake the role of slinger/signaller.

This course will cover the following elements:

· Legislation

· Terminology

· Code of Practice

· Safe Working Loads (SWL)

· Hand signals

· Inspection of lifting equipment

· The use of correct lifting equipment

· Types of lifting equipment

· Attaching / detaching the load to and from the crane

Candidates will be required to undertake a practical examination.

Candidates will be required to complete a question paper at the end of the course.

A Certificate will be awarded to those delegates who reach a satisfactory standard.

Telephone – 01743 446666
Fax – 01743 442448
E Mail – webcontact@hoistquip.co.uk
Web – http://www.hoistquip.co.uk/

Training Course - The Erection and use of Mobile Scaffold Towers

2008-06-24T04:43:00.001-07:00

THE ERECTION AND USE OF MOBILE TOWERS

INTRODUCTION

This 1 day course is designed to give delegates the knowledge and skills necessary to safely erect and use mobile scaffold towers.

This course will cover the following elements:

· Types of mobile towers
· Aluminium
· Steel
· Where to erect the mobile tower
· Ground conditions
· Components of a mobile tower
· Guard rails and toeboards
· Boarding
· Height limitations
· Access requirements
· Using mobile towers

ASSESSMENT

A Certificate will be awarded to those delegates who reach a satisfactory standard.

Telephone – 01743 446666
Fax – 01743 442448
E Mail – webcontact@hoistquip.co.uk
Web – http://www.hoistquip.co.uk/

Training Course - The Erection and use of Mobile Scaffold Towers

2008-06-24T04:43:00.000-07:00

Training Course - Scaffold Appreciation

2008-06-24T04:42:00.000-07:00

SCAFFOLD APPRECIATION

INTRODUCTION

This ½ day course is designed for those likely to be working on scaffolds, such as bricklayers and painters. It will provide them with the knowledge and skills required for working on scaffolds safely.

The course will cover the following elements:

· Working load of the scaffold
· Is it designed to hold heavy weights (bricks, etc)
· Width of the working area
· Others working on the scaffold
· Securing the scaffold from trespassers at the end of the working day
· Safe access and egress

ASSESSMENT

A Certificate will be awarded to those delegates who reach a satisfactory standard.

Telephone – 01743 446666
Fax – 01743 442448
E Mail – webcontact@hoistquip.co.uk Web – http://www.hoistquip.co.uk/

Training Course - Scaffold Inspection

2008-06-24T04:41:00.000-07:00

SCAFFOLD INSPECTION

INTRODUCTION

This half-day course is designed to give delegates the necessary knowledge and skills required to inspect fixed and portable scaffolds.

This course will cover the following elements:

· Types of scaffolds
· Independent tied
· Putlog
· Mobile towers
· Scaffold components
· Toe boards
· Boards
· Guard rails
· Brick guards
· Ground suitability
· Access and egress
· Ladder suitability

ASSESSMENT

A Certificate will be awarded to those delegates who reach a satisfactory standard.

Telephone – 01743 446666
Fax – 01743 442448
E Mail – webcontact@hoistquip.co.uk
Web – http://www.hoistquip.co.uk/

Training Course - Selection and use of Safety Harness

2008-06-24T04:39:00.000-07:00

SELECTION AND USE OF A SAFETY HARNESS

INTRODUCTION

This ½ day course is designed to give delegates the knowledge and skills required to ensure the correct selection and use of a safety harness.

This course will cover the following elements:

· Legislation
· Personal Protective Equipment Regulations 1992
· Provision and Use of Work Equipment Regulations 1998
· The height of working in which a harness will be required
· Checking the harness for defects
· Abrasions at the edges
· Damaged stitching
· Knots in the lanyard
· Attaching the harness

ASSESSMENT

Delegates will be required to complete a question paper at the end of the course.

A Certificate will be awarded to those delegates who reach a satisfactory standard.

Telephone – 01743 446666
Fax – 01743 442448
E Mail – webcontact@hoistquip.co.uk
Web – http://www.hoistquip.co.uk/

Training Course - Working at Height

2008-06-24T04:37:00.000-07:00

WORKING AT HEIGHT

INTRODUCTION

Working at heights still constitutes one of the highest risk activities you will undertake on a site. We can help you comply with the requirements of the Working at Height Regulations 2005.

TRAINING

The half day course covers various related topics:

· Awareness of working at heights

· Selection of appropriate equipment
· Scaffold
· MEWPs
· Mobile Towers
· Ladders and stepladders
· Selection of fall prevention/fall arrest equipment
· Safety harness

ASSESSMENT

Candidates will be required to complete a question paper at the end of the course.

A Certificate will be awarded to those reaching a satisfactory standard.

Telephone – 01743 446666
Fax – 01743 442448
E Mail – webcontact@hoistquip.co.uk
Web – http://www.hoistquip.co.uk/

Electric Chain Hoists - Yale Hoists, CPV, CPE Hoist.

2008-06-20T03:19:00.000-07:00

Electric Chain Hoists from HoistQuip

Yale chain hoists supplied by HoistQuip convince through their compact, elegant design, low tare weight and their robust construction. A precision machined, case hardened load chain sheave perfectly matched to the load chain, oilbath lubricated gearbox with hardened gears and high quality encapsulated bearings ensure smooth, quiet operation. The adjustable slip clutch, fitted as an overload safety device, is engineered for low maintenance and also serves as an overrun protection for the highest and lowest load hook positions. The pendant control is fitted with an emergency-stop switch as standard. Forged suspension and load hooks, manufactured from non-ageing, high alloy tempering steel, yield under overload instead of breaking. Apart from the stationary configurations (hook suspension) manual push, geared and electric trolleys are available. The trolleys are suitable for all commercial beam profiles e.g. INP, IPE and IPB. The electric trolleys are fitted with a self-braking worm gearbox. The surface protected, high tensile load chains are in accordance with national and international standards and regulations (DIN EN 818).

Model CPV/F Capacities 250 - 2,000 kg

The new Yale electric chain hoist supplied by HoistQuip, model CPV/CPVF combines modern design and technical innovation.A robust construction makes the series a versatile tool for industrial applications. Upper and lower limit switches considerably extend the working life span of the slipping clutch, motor and gearbox. Features
Load sprocket and chain guide can easily be inspected or removed without disassembly of the complete unit. Designed to FEM 1Am. Main line contactor for increased safety. Two year warranty (excluding wearing parts) and a life time lubricated gearbox. Thermal overload protection as standard for the whole range. Optimised housing for improved cooling. Duty cycle 50% ED for single speed. Electromagnetic spring pressure brake holds the load safely even in the event of power failure. The externally adjustable slipping clutch is designed to guarantee a permanent connection between the load and the brake. Motor protected to IP 55 against ingress of dust and water. Standard operating voltage: 400v, 3-phase. Increased operating safety through 42v low voltage control with encapsulated pendant control to IP 65. Suspension lug (as standard) for reduced headroom and easy integration into trolley applications. Chain guide made of glass reinforced polyamide for increased wear resistance. The oil bath lubricated gearbox contains case hardened helical cut gearing for smooth, low noise running and enhanced lifetime. Fully compatible with the VTE/S range of trolleys.

Model CPE with Suspension Hook Capacities 1,600 - 10,000 kg Model CPE with Integral Trolley Capacities 1,600 - 10,000 kg

The CPE series is a range of high quality products for professional applications. They are highly efficient and engineered for a long working life. The hoists are composed of three main component parts which makes service easy and inexpensive. Features
The standard, oil bath lubricated planetary gearbox is particularly smooth running and enables a low overall height. The standard version comes with direct control. Contractor control (42v) is optionally available. The 5-pocket load chain sheave, manufactured from wear-resistant case hardening steel, is matched perfectly to the load chain to guarantee smooth and precise chain motion. case hardened and zinc plated link chain. The heavy duty squirrel cage motor has an adjustable spring pressure brake that holds the load secure even in the event of a power failure. The motor is designed for high duty cycles. Motor fitted with a bimetallic thermal protection (useable in connection with optional low voltage control). 400 or 230V, 3-phase, 50Hz, Euro-voltage, resp. 460 or 230V, 3-phase 60Hz Versions with two speed trolley VTEF 400V 50Hz, resp. 460V 60Hz. Motor protected to IP54, Insulation class F

Twin Hoist Model CPE 100-2 Capacity 10,000 kg

The model CPE 100-2 consists of two CPE 50-2 units connected by a framework. Hook suspension, geared or electric trolleys are available. Integral limit switches for highest and lowest hook positions are standard.

Beam Testing, Proof Load Testing, SWL Testing, Eyebolt Testing

2008-06-19T06:40:00.000-07:00

http://www.hoistquip.co.uk/

Testing, Inspection and Certification
skip to: technical information make an enquiry
Runway Beam Testing, SWL alterations and re-marking, Eyebolt Load Testing, Lifting Equipment Test and Inspection, Destructive and Non-Destructive testing, Dedicated Inspection regimes, DataBase Reporting, Safety Equipment Inspection and Marking, Load Test
HoistQuip have extensive experience of providing Test and Inspection services specifically in the following areas :
Runway Beam Testing
SWL alterations and re-marking
Eyebolt Load Testing
Lifting Equipment Test and Inspection
Destructive and Non-Destructive testing
Dedicated Inspection regimes, DataBase Reporting
Safety Equipment Inspection and Marking
Load Testing
SWL Testing (Safe Working Load)
Compression Testing of Hydraulic Equipment
Tensile Testing of Lifting Equipment
Testing on-site using calibrated Test weights
Deflection Testing
Static Load Testing
Dynamic Load Testing
See Details of HoistQuip's other Capabilities here : http://www.flickr.com/photos/hoistquip/
Testing, Load testing, Beam Testing, Eyebolt Testing, Lifting Test, SWL Testing, Proof Load testing, Static Load Testing, Pull Test, Beam Testing, Runway Beam Testing, SWL alterations and re-marking, Eyebolt Load Testing, Lifting Equipment Test and Inspection, Destructive and Non-Destructive testing, Dedicated Inspection regimes, DataBase Reporting, Safety Equipment Inspection and Marking, Load Testing, SWL Testing (Safe Working Load), Compression Testing of Hydraulic Equipment, Tensile Testing of Lifting Equipment, Testing on-site using calibrated Test weights, Deflection Testing, Static Load Testing, Dynamic Load Testing, Test performed on Lifting Points and Personnel Lifting Points, Pull Test, Gantry Testing, Crane Testing, Crane Beam Testing
Testing, Load testing, Beam Test, Eyebolt Test, Lifting Test, SWL Test, Proof Load test, Static Load Test, Pull Test, Beam Test,

Lifting Beams and Spreader Beams

2008-06-19T06:32:00.000-07:00

Lifting\Spreader Beams
skip to: technical information make an enquiry

Lifting Beams, cranes, hoists, jib, Jibs, Lifting Beams, Spreader Beams, Low Headroom Lifting, Cruciform Lifting Beams, Big Bag Lifting Beams, modulift, beams for lifting, Adjustable spreader beam, roof truss lifting beams, I section lifting beams.
Lifting Beams
See examples of HoistQuip's Lifting Beams here : http://www.flickr.com/photos/hoistquip/
Lifting\spreader beams are the practical and safe choice for long material to prevent sagging and shifting, or for loads where the weight has to be carefully distributed or suspended from several points.
The extensive standard programme offers a wide variety of payloads, working widths, adjustable ranges and hooks for common applications. The heavy-duty and cost-effective standard type is complimented by various special designs made to customer's specifications.
These may include spreader beams with hooks for plate material, or with C-hooks, crane forks, or grabs for bulky and long materials.
Special designs with laterally fixed hooks are fitted with slings to pick up rolls, pipes and similar objects. Also available are the so called 'star' spreader beams for picking up cylindrical materials and spreader beams with side hooks and 4-point support which share the easy operation, reliability and safety of all our Lifting\Spreader beams.

HoistQuip have extensive experience in the Design, Manufacture and Installation of :
Lifting Beams, Spreader Beams, Low Headroom Lifting, Cruciform Lifting Beams, Big Bag Lifting Beams, modulift, beams for lifting, Adjustable spreader beam, roof truss lifting beams, I section lifting beams. 2 Point lifting Beams, 3 Point Lifting Beams, Multi Point Lifting Beams.
Lifting Beam, Spreader Beam, Low Headroom Lifting, Cruciform Lifting Beam, Big Bag Lifting Beam, modulift, beams for lifting, Adjustable spreader beam, roof truss lifting beam, I section lifting beam. 2 Point lifting Beam, 3 Point Lifting Beam, Multi Point Lifting Beams.

General Fabrication

2008-04-30T05:24:00.000-07:00

General Fabrication

Our Experienced in-House Design and Fabrication team allows us to provide much more than just Cranes and Lifting Equipment,

Fabrications we have previously undertaken include:

Mezzanine Floors.
Access Stairways Ladders, and Handrails.
Trailers, Trolleys and Transporting units.
Heavy Duty Industrial Doors.
Racking, Baskets, Brackets, Cages and Storage Units.
Loading Bay Equipment, Ramps etc.
Gates, Fencing and Security Products.
Manipulators, Agricultural machinery etc.

And we have the capability to provide the following:

Stainless Steel Fabrications.
Mild Steel Fabrications.
Aluminium Fabrications.
Galvanised Steel Finishes.
Curved Sections.
Laser Profiled Sections.
Sheet Metal Fabrications.
Alterations, Extensions, Stiffening etc.
Machined Fabrications (Machining In-House).
Machined Nylon, Brass, Hardened Steel etc.

Welcome to HoistQuip

2008-04-30T05:21:00.001-07:00

Since 1976 HoistQuip have been a leading supplier and manufacturer of Cranes, Jib Cranes, Lifting and Handling equipment. We have been satisfying the needs of our customers by designing, manufacturing, and installing Overhead Cranes, Runways, Jib Cranes, Lifting Beams, Conveyor systems, Lifting Grabs etc, as well as specialist handling solutions. In addition we supply a large range of standard lifting products to meet most needs and have extensive capability in-house to Inspect, Test, Service and Repair your Lifting Equipment. Based in Shropshire, we have grown our customer base over the years to work all over the UK, Ireland and mainland Europe. We pride ourselves on the ability to provide a one-stop-shop for lifting and handling equipment. Our highly experienced in-house team allows us to provide the following capabilities in-house:
Technical Sales expertise.
Site Survey.
Design & Calculation.
Installation.
Crane, Jibs & Lifting Equipment Test & Commission.
Crane, Jibs & Lifting Equipment Service.
24Hr Breakdown Callout - CALL 07968 130018
Training & Certification on Cranes & Lifting Equipment.
Lifting Equipment Suppliers.
Online Lifting Equipment DataBase.
.HoistQuip generates lifting solutions by combining extensive product knowledge with an in depth understanding of the needs of customers.
HoistQuip are members of the Lifting Equipment Engineers Association (LEEA). The LEEA imposes stringent technical standards on its members, thus providing customers with an assurance that work will be carried out in accordance with current legislation by trained people. We can also advise on changes that are 'in the pipeline'.
HoistQuip is an ISO 9000:2000 Registered company audited through Moody International Certification.

See HoistQuip on YouTube : http://uk.youtube.com/HoistQuip
See HoistQuip Blog : http://hoistquip.blogspot.com/
See HoistQuip Photos : http://www.flickr.com/photos/hoistquip/

Our highly experienced team are qualified in:
Mechanical & Manufacturing Engineering
2d & 3d CAD
Electrical Engineering
Project Management
NEBOSH & IOSH Health & Safety qualifications
LEEA Members - (Lifting Equipment Engineers Association)
LOLER and PUWER Regulations
Manual Handling Regulations
And engineers are affiliated to the following schemes:
IOSH Passport to Safety
CCNSG
CSCS
LEEA
If you need help in selecting the right product for your application or advice in general, please call 01743 446666, or email webcontact@hoistquip.co.uk
Crane manufacturer, Cranes, Jibs, Jib Cranes, Lifting Beams, Runways, Spreader Beams, Grabs, Lifting Grabs, loler, achilles, Testing and Inspection, lifting equipment, Hoist Equipment, Hoist, Fabrication, Lifting Equipment Suppliers, lifting gear, Training.