The EUROLIFT BH is today the only belt and hook hoisting unit offering you the following features in its standard version:
Hoisting belt: high strength belt with high safety factors, easy and quick to replace, thanks to its design.
Two mechanically variable hoisting speeds.
Belt guide: enhanced safety features against side pulling and twisting effects during lifting movement.
Hoisting and control features complying with IEC 34.1/IEC 34.2, IP 55 protection and class insulation standard.
Totally enclosed , high precision, silent and sealed reduction gear.
Adjustable upper and lower limit switches.
Travelling limit switches.
Load limiter, safety feature protecting against excessive overloading of the pulley and runway path.
(mandatory, to comply with the "MACHINES" Directive).
Very low "C" dimensions and hook "approaches".
True vertical lift (vertical movement of hook block when hoisting)
High strength polyester belt.
Flame-retardant with good dimensional stability and excellent ability to main-tain its strength after immersion inboiling water.
Excellent ability to withstand attack by acids.immune to attack by solvents.Rot-proof.
BH5: Dynema belt (this belt has the same characteristics as those of the BH2, with a greater safety factor).
The EUROLIFT BH can be equipped with a great many options and can be specifi cally adapted for special purpose uses:
Total anti-corrosion protection.(*)
Covering roof for protection against rain.
Horn controlled from push button box.
Non standard beam section width
Higher travelling speeds
EUROMOTE type infrared or radio remote-control
Travelling movement limit switch
Trolley mounted on bogies
Special power supply voltage
Tropicalised travelling movement and lifting motors
Load limiter with 2 or 3 steps
Stainless steel hook and hook block (**)(*) except BH5.(**) up to 2.5 T only. 3.2 T and 5 T stainless steel hook block, painted hook.
See HoistQuip Website : http://hoistquip.co.uk/
See HoistQuip Photos : http://www.flickr.com/photos/hoistquip/